Standing seam metal roofs have been around for some time now, but were used almost exclusively for commercial roofing projects. It was just recently that they began gaining popularity in the residential roofing market because of their unique roofing aesthetic. The growing preference for modern-contemporary and industrial themed homes increased the demand for standing seam metal roofs everywhere -- London ON, included.
If you're interested in learning more about standing seam metal roofs, this article by Lee Wallender for The Spruce will give you a better insight on the subject.
Standing Seam Metal Roof Basics
For a long time, your main option for roofing materials was asphalt shingles. Few other choices were available, and if you wanted a different roofing material, you had better be prepared to pay top dollar for it.
Standing seam metal roofs were only a figment of the imagination in the minds of average homeowners. Most metal roofs were confined to commercial buildings or only to very cool, very expensive architect-driven residential structures. Now, they seem to be popping up on every block. Will standing seam metal roofs supplant composition shingles as the roofing material of choice?
Composition Shingles vs. Standing Seam Roofing
Asphalt and composition shingles do have their high points, and they are not going away anytime soon. For one, if you want to purchase a dead-cheap roofing material, asphalt and composition tend to be the way to go. There are two problems with composition shingles, though. First, the cost of composition shingles is influenced by oil prices, as they are derived from petroleum. This means that prices can fluctuate due to pressures outside of the roofing industry. Second, composition and asphalt shingles tend to lose surface material. Read more here...
If you're already set on a standing seam metal roof, Cub Roofing is your best choice for London ON metal roof installation or replacement. Before contacting the the roofers though, you might want to check out this from post for a more in-depth information about this specific roofing option.
An Architect’s Guide To: Standing Seam Roofs
The term standing seam comes from the connections between the metal panels that are raised. The seams run vertically and are created by folding and crimping the edges between the panels. These roofs require minimal maintenance and provide both extreme resistance to high winds and a high fire rating. As a durable choice for roofing, we’re exploring the systems, materials and performance of standing seam roofs.
Systems
Standing seam roofs are available in several different types, with multiple methods of seaming and different metal used in manufacturing the roofing system.
Non-structural panel: A non-structural panel system uses two sections. One is the flat panel and the other is the batten or seam. The seam portion snaps into place over the clips protecting and concealing the fasteners. With the batten system, spacer clips are installed and locked into place. This type of standing seam metal roof must be installed over a solid substrate; it cannot be installed as a stand-alone or raised system. Tapered or curved panels are available.
Continuous seam positive locking: The continuous standing seam metal roof design uses an integral seam. Each panel is designed to snap into place over the previous panel and then it is fastened with clips. No seam caps are required and this reduces the potential for any creeping of the seam. Continuous seam systems can be directly fastened to a solid substrate. The positive locking installation reduces labor in the field. Read more here...
As it's made from metal, it shares the same durable characteristic with other types of metal roofing options. But curb appeal and durability aside, standing seam roofing has a lot more going for it than just looks. This article from clearcreekroofing.com best summarises the advantages of standing standing seam metal roofs.
Benefits of Standing Seam Metal Roofing
- Customization While it’s true that asphalt shingles are making advancements in customization options, they don’t come anywhere near the potential of standing seam metal options. These panels come pre-fabricated to snap into place, but they can be painted and finished to fit any color scheme as well as reflect ultra-violet radiation at the same time. If you need something to fit in with your home’s design, or if you’re looking to add a splash of color to your building, this is the perfect option for you.
- Durability Most metal is stronger than typical shingles. Standing seam metal panels are heavily resistant to impacts and other forms of damage. It comes in different gauges of thickness as well, so the heavier materials offer even more protection from storms and other problems. Since the seams are vertical, raised above the roof itself, and covered by the interlocking parts, this minimizes the chances that it will spring a leak over time. They’re also treated and coated to prevent rust and colors from fading over time, meaning they should last even longer as a result.
- Easy Maintenance Most upkeep procedures are relatively easy to complete. Typical upkeep is usually removing debris to make sure it can’t trap water or create further problems. While each panel is treated to be resistant to corrosion, it should be inspected from time to time to ensure that everything is rust free and still in place. If panels become loose, damaged, or need service of some kind, the affected area can be entirely removed and replaced with a new panel while the older one is serviced. That means that standing seam metal roofing is one of the easiest materials for upkeep since it can be removed for care, while repairs to things like tiles and shingles mean working on the affected area while the materials are still attached to the roof. Read more here...
Metal roofs may cost up to 4x more expensive than asphalt shingles, but their advantages far outweigh their cost. If you want a beautiful roof that will last you a lifetime, this one's a pretty tough contender.
For details about Cub Roofing's standing seam metal roof installation, speak to one of our roofing specialists.
Contact us today!
Read Full Article Here: A Guide to Standing Seam Metal Roofs for London, ON Homeowners
Cub Roofing
352 Talbot St
London, ON N6A 2R6
226-779-3531
No comments:
Post a Comment